2
QIP7100 Quick Start Guide
POWER
QIP7100 2
1
2
3
4
OK
Front Panel
The front panel controls provide functional navigation if the remote control is lost or is temporarily out of service. Certain functions,
such as those requiring a numeric entry, require a remote control. Some connectors are not enabled and require the support of
application software.
Rear Panel
The rear panel contains a 3-prong power outlet; connectors for video, audio, and RF cabling; data output; and data interface connectors.
Some connectors are not enabled and require the support of application software.
Before You Begin
1
USB connector
2
Cursor — 4-way menu navigation
3
— Startup Indicator
•
4
Power — Turns the set-top on and off (standby)
1
FiOS TV In — Connects to FiOS signal from your service provider
2
IR Remote Input — Connects to a remote control set-top accessory cable
3
Reserved – Service only
4
IEEE-1394 — Audio and video device connection
5
RF Out — Ch 3/4 modulated audio/video (SDTV) to TV or VCR
6
YPbPr — Component video output (HDTV)
7
Audio — Composite Audio L/R outputs
8
Video — Composite Video (SDTV) output
9
Digital Audio (Coaxial)* — Provides Dolby® Digital 5.1 audio or PCM output
10
Optical Audio (S/PDIF)* — Provides Dolby® Digital 5.1 audio or PCM output
11
S-Video — Connects to S-Video (SDTV) input of TV or VCR
12
HDMI — High-Definition TV (HDTV) connector
13
Ethernet* — Network connection
14
USB* 2.0 — High-Speed peripheral device connection
15
Power cord connector — 3-prong AC outlet
*Feature is dependent upon application setting and availability in content
