Motorola PRO2150, Руководство пользователя, Страница: 14 / 24

June 28, 2002 99R85451E01
8 Entering Phone Mode
Entering Phone Mode
Phone Mode allows you to dial DTMF digits without having to press and hold the PTT .
• Press the Phone Mode button to enter Phone Mode. You can now press the keypad buttons to
send out DTMF digits.
• Press the - button to exit Phone Mode.
Connecting to a Telephone
You can use your radio to connect to a phone line and make a phone call. To do this, your radio must
send an
Access Code to a station that connects it to a phone line. After completing a call, your radio
must send a De-access Code to hang up. Contact your dealer for details.
When dialing Access/De-Access codes and phone numbers, you need to press and hold the PTT .
Alternatively, you can use Phone Mode.
Sending the Access Code
If your radio is pre-programmed with the Access Code, press + followed by *. Alternatively, dial the
Access Code using the keypad.
Sending the Phone Number
After sending the Access Code, wait for a dial tone before sending the phone number. You can send
the phone number using one of the following methods:
The Phone Conversation
After the call is connected, speak as you would normally do on your radio. Press the PTT to speak
and release the PTT to listen.
Ending the Phone Call
Your radio must send the De-access Code to end the call.
• If your radio is pre-programmed with the De-access Code, press + followed by #. Alternatively,
dial the De-access Code using the keypad.
Method Steps
Speed Dial Press + followed by the key (1 to 9) corresponding to the number you want to call.
Live Dial Enter the phone number using the keypad. The radio transmits each number as you
enter it.