Motorola PRO2150, Руководство пользователя, Страница: 10 / 24

June 28, 2002 99R85451E01
4 Programming Mode
Programming Mode
This mode allows you to change feature parameters to enhance the use of your radio.
Entering Programming Mode
If your radio is turned on, turn it off. Press and hold the Monitor button, and turn on your radio. You
will hear a ringing tone which indicates that your radio has entered Programming Mode. The
K
indicator illuminates and RW is displayed.
Exiting Programming Mode
Turn off the radio to exit Programming Mode.
Accessing Programming Mode Parameters
Press the PTT or the Monitor button to scroll through the features available in Programming Mode.
Press the +/- button to scroll through the parameters for each feature.
Feature Range Remarks
Squelch Level
(SQL-XX) SQL-00, …, SQL-15 Select low level when you need to receive very weak
signals and high level when the communication does not
have to travel far.
Scan List 1
(SCANLST1) 1-01-XXX, …,
1-16-XXX,
(XXX denotes channel
number.) Up to 16 members per scan list. First member is
assigned as Priority Channel, if Priority Scan is started.
When scanning is started, only these 16 members will be
scanned. Each channel can choose to use Scan List 1, 2
or 3. By default, all your channels select Scan List 1. If
there is special need to use the other two scan lists for
some of your channels, consult your dealer. Press the +
or - button to move from one scan list member to
another. To include a channel into the scan list, enter the
desired channel number using the keypad. To erase a
channel number from the scan list, press #.
Scan List 2
(SCANLST2) 2-01-XXX, …, 2-16-XXX Consult your dealer.
Scan List 3
(SCANLST3) 3-01-XXX, …,
3-16--XXX Consult your dealer.
Time Out Timer
(TOT-XXX) TOT-OFF, TOT-001, …,
TOT-010 This determines the maximum duration (in minutes) that
you can transmit continuously.
Battery Saver
(BS-XXXX) BS-OFF,
BS-NORM,
BS-ENH Battery Saver helps to extend battery life. When enabled,
it turns off the radio receiver circuitry periodically if no
activity is detected. BS-NORM (Normal) turns off the
radio less frequently; select this if you want to save
battery, but expect a Selective Call. BS-ENH (Enhanced)
turns off the receiver for a longer duration; select this if
you want to maximize battery power and do not expect to
receive a Selective Call.
Battery Type
(BT-XXXX) BT-NIMH Selects the type of battery that your radio uses: NiMH
(Nickel Metal Hydride).
Alert Tone Volume
(BEEP-X) BEEP-OFF, BEEP-1,
BEEP-2,
BEEP-3 Selects the alert tone volume needed. Select BEEP-OFF
if you require quiet operation, or BEEP-3 if working in a
noisy environment.
Prime Channel
Select
(PRM-XXX) PRM-OFF, PRM-001, ….,
PRM-XXX,
XXX denotes the highest
channel number
supported by your model. The Prime Channel is the channel that you wish to spend
most of your time monitoring. The radio will always
switch back to the Prime Channel if it is idle for more
than the pre-programmed hang-time in other channels.