18
ENGLISH
If a status indicator light does not look correct, look for these possible problems:
If LED is
not Lit
Possible problems
Power
•
Make sure the power switch is in the ON position.
•
Make sure the power adapter is plugged into the DSL Gateway properly.
•
Try a known good wall outlet.
•
Replace the power supply and/or unit.
DSL
•
Make sure that any telephone has a microfilter installed.
•
Make sure that you are using the correct cable. The DSL cable is the thinner standard tele-
phone cable.
•
Make sure the DSL cable is plugged into the correct wall jack.
•
Make sure the DSL cable is plugged into the DSL port on the DSL Gateway.
•
Make sure the DSL line has been activated at the central office DSLAM.
•
Make sure the DSL Gateway is not plugged into a micro filter.
Ethernet
1,2,3,4
•
Make sure you are using the Ethernet cable, not the DSL cable. The Ethernet cable is thicker
than the standard telephone cable.
•
Make sure the Ethernet cable is securely plugged into the Ethernet jack on the PC.
•
Make sure the Ethernet cable is securely plugged into the Ethernet port on the DSL Gate-
way.
•
Try another Ethernet cable if you have one available.
•
Make sure you have Ethernet drivers installed on the PC.
•
Make sure the PC’s TCP/IP Properties for the Ethernet Network Control Panel is set to obtain
an IP address via DHCP.
•
Make sure the PC has obtained an address in the 192.168.1.x range. (You may have
changed the subnet addressing.)
•
Make sure the PC is configured to access the Internet over a LAN.
•
Disable any installed network devices (Ethernet, HomePNA, wireless) that are not being
used to connect to the DSL Gateway.
Содержание Netopia 2241N-VGx
Страница 1: ...User Manual The Motorola Netopia 2247 57 62 DSL Gateway 4 port Ethernet 802 11b g Wi Fi ...
Страница 22: ......
