Motorola MVME712A, Инструкция по установке и эксплуатации

Страница: 29 / 80

2-12 Computer Group Literature Center Web Site
Preparing and Installing the Hardware
2
Serial port 4 clock configuration select header -- J15
Serial port 4 can be configured to use clock signals by the TRXC4 and
RTXC4 signal lines. Header J15 configurations of the clock lines are
shown in
Figure 2-10 . The module is shipped without clock lines
connected (no jumpers).
Part of the configuration must be done with headers or switches on the
processor VMEmodule, as listed in the following table.
For more information see Figure 2-9 and the installation guide furnished
with your processor VMEmodule.
Figure 2-10. J15 clock line configuration
Table 2-2. VMEmodule headers/switches
Processor Module Header Processor Module Header
MVME147 J8, J9 MVME1600 J8, J15, J16
MVME162 J12 MVME2600 J16, J17, J20
MVME167 J9, J10 MVME2700 J16, J17, J19
MVME177 J9, J10 MVME3600 J9, J10, J16
MVME4600 J9, J10, J16
TRXC4 TO PORT 4 PIN 15
TRXC4 TO PORT 4 PIN 17
TRXC4 TO PORT 4 PIN 24
RTXC4 TO PORT 4 PIN 24
RTXC4 TO PORT 4 PIN 17
RTXC4 TO PORT 4 PIN 15
cb210 9212A
1 3 5 7 9 11
J15