Motorola MVME1603, Инструкция по установке и эксплуатации

Страница: 169 / 222

CNFG and ENV Commands
6-13
6
VME2PCI Slave Address Offset #1 = 00000000?
Used in translating the most significant 16 bits of the address to be
presented to the VMEchip2 from the PCI bus. The address presented
is equal to the sum of PCI address (bits 31-16) and the value of this
register (bits 31-16). Bits 15-00 will be zero. (Default = $00000000)
VME2PCI Slave Enable #2 [Y/N] = Y?
VME2PCI Slave Starting Address #2 = 20000000?
Controls the starting address of the second PCI Memory Space for the
VME2PCI’s slave interface. PCI memory accesses within the range of
this starting address and its associated ending address are passed on to
the VMEchip2, after modification by the address offset value. Only
the upper 16 bits of this address are significant. (Default = $20000000)
VME2PCI Slave Ending Address #2 = 2FFFFFFF?
Controls the ending address of the second PCI Memory Space for the
VME2PCI’s slave interface. Only the upper 16 bits of this address are
significant. (Default = $2FFFFFFF)
VME2PCI Slave Address Offset #2 = D0000000?
Used in translating the most significant 16 bits of the address to be
presented to the VMEchip2 from the PCI bus. The address presented
is equal to the sum of PCI address (bits 31-16) and the value of this
register (bits 31-16). Bits 15-00 will be zero. (Default = $D0000000)
Slave Address Decoders
The slave address decoders are used to allow another VMEbus master to
access a local resource of the MVME1603/1604. There are two slave
address decoders set. They are set up as follows:
Y
Set up and enable VME2PCI Slave Address Decoder
#2. (Default)
N
Do not set up or enable VME2PCI Slave Address
Decoder #2.