Motorola MTP850 Скачать руководство пользователя страница 55

Страница: 55 / 118

TEST SETUP & TESTING 806-870MHz

MTP850

TETRA Handportable Terminal / Basic Service Manual

5.2 - 11

Manual Mode Testing

Preparation for Testing

1. Verify that the radio is turned off.

2. Press the “4”, “5” and “6” keys together and then, press the On/Off key to turn

the radio on.

3. The display shows “LCD Color test Press Any Key To Proceed”.

Tests

Note:

Any key that will be pressed will cause the test to advance from one step to

the next.

1. Press any key consecutively. The display shows horizontal red lines that

becomes thicker with every key press, until it becomes fully red.

2. Press any key again, the display shows four colored rectangles.

3. Press any key consecutively. The display shows vertical green lines that

becomes thicker with every key press, until it becomes fully green.

4. Press any key again. The display becomes fully blue and the message

“END LCD test !!!” appears.

5. Press any key again. The display shows “Battery Interface Test”.

6. Press any key again. The display shows “Battery Interface Test PASS”.

7. Press any key again. The display shows “Vibrator On”, verify that the radio is

vibrating.

8. Press any key again. The display shows “Red Led on” and the Red LED at

the top of the radio is lit.

9. Press any key again. The display shows “Green Led on” and the Green LED

at the top of the radio is lit.

10. Press any key. The display shows “Both Leds on” and the LED located on the

top of the radio is blinking in amber (combination of red and green lights of

the two halves of the LED).

11. Press any key again. The display shows “Keypad Backlight On” and the

keypad backlight is On.

12. Press any key again. The display shows “Display Backlight On” and the

display backlight is On.

Содержание MTP850























































































































Результаты поиска

Содержание MTP850

Отзывы:

Похожие инструкции для MTP850

Бренды по названию

Популярные бренды

Motorola MTP850, Руководство по обслуживанию

Результаты поиска

Содержание MTP850

Отзывы:

Похожие инструкции для MTP850

Бренды по названию

Популярные бренды