manualshive.com logo in svg

Motorola MPMC101, Руководство пользователя

Поделиться
Скачать
Motorola MPMC101 Скачать руководство пользователя страница 3

 

Preface

 

The information in this manual is adapted from the 

 

4520/5520 PCI SCSI-2 Adapter 

UserÕs Guide

 

, Interphase part number UG05520-000.

This manual describes the PCI and PMC SCSI-2 adapters, the installation of the 
adapters into a motherboard, and the installation of the PCI software drivers. 
Please note that only the MPMC101 Single-ended PMC SCSI-2 Adapter is 
currently supported by Motorola.

The terminology and structure of this manual are directed to system 
administrators, or those with equivalent technical experience. 

The manual is organized as follows:

 

Chapter 1, 

 

Introduction

 

, provides general information about the PCI SCSI-2 

adapters, product features, and system requirements. Brief overviews for the PCI 
bus and the SCSI-2 architectures are provided at the end of the chapter.

 

Chapter 2, 

 

Hardware Installation

 

, 

 

provides step-by-step instructions for 

installing the PCI Adapter in a PCI bus-based user stations and servers. Installation 
of the PMC Adapter into motherboards that support a PMC mezzanine 
architecture is discussed in the latter sections of the chapter.

 

Chapter 3, 

 

Software Driver Installation

 

, provides a guide for conÞguring the AIX 

operating system, and step-by-step instructions for installing the PCI SCSI-2 
Driver for the 

 

Windows NT

 

 operating systems.

 

Chapter 4, 

 

Troubleshooting

 

, 

 

provides tips and suggestions when having problems 

with the installation or with the operation of the adapters.

 

Appendix A, 

 

SpeciÞcations

 

, provides operating criteria and environmental limits 

for the adapters.

 

Glossary

 

, A collection of common acronyms and terms used in describing SCSI 

activity and functions.

Содержание MPMC101




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды