Motorola MOTOSLVR, Руководство пользователя

Страница: 16 / 33

37 basics
basics
See page 1 for a basic phone diagram.
display
The home screen shows when you turn on the phone. To dial
a number from the home screen, press number keys and
N
.
Note: Your home screen may look different from the one
below, depending on your service provider.
The Menu Indicator
À
shows that you can press
-
to open
the menu. Soft Key Labels show the current soft key
functions. For soft key locations, see page 1.
Your home screen might show news from your service
provider at the bottom. To change this news view,
press
-
> Settings > Personalise > Home Screen .
Right Soft
Key Label
Clock
Left Soft
Key Label
Menu Indicator
Camera Messages
Service Provider
12:00
38 basics
Status indicators may be shown at the top of the home
screen:
1 Signal Strength Indicator – Vertical bars show the
strength of the network connection. You cannot make or
receive calls when
!
or
)
shows.
2 GPRS Indicator – Shows when your phone is using
a General Packet Radio Service (GPRS) network
connection. Indicators can include:
*
= GPRS PDP context active
+
= GPRS packet data available
+
040079b
1. Signal Strength
2. GPRS
3. PTT
4. Bluetooth
5. Roam
6. Active Line
9. Battery Level
8. Ring Style
7. Message
Setup Home Messages
Service Provider
12:00
39 basics
3 PTT Indicator – Shows when you can make and
receive PTT calls (
U
) or both PTT calls and Instant
Messages (
p
). Other indicators can include:
4 Bluetooth Indicator – Shows when a Bluetooth®
connection is active (
à
).
5 Roam Indicator – Shows when your phone is
seeking or using a network outside your home
network. Indicators can include:
6 Active Line Indicator – Shows
?
to indicate an
active call or
>
to indicate when call forwarding is
on. Indicators for dual-line-enabled SIM cards can include:
7 Message Indicator – Shows when you receive a
new message. Indicators can include:
8 Ring Style Indicator – Shows the ring style setting.
4
= secure packet data
transfer
7
= unsecure packet
data transfer
3
= secure application
connection
6
= unsecure application
connection
2
= secure Circuit Switch
Data (CSD) call
5
= unsecure CSD call
:
= 2G home
;
= 2G roam
8
= 2.5G home
9
= 2.5G roam
@
= line 1 active
A
= line 1 active, call forward on
B
= line 2 active
C
= line 2 active, call forward on