Motorola Motomesh 1.0, Руководство пользователя

Страница: 23 / 51

MOTOMESH 1.0 Mesh Wireless Router Users Guide
6881011Y53-O September 2005
2-7
The longitude, latitude, and altitude values should be entered to a precision of 5
digits following the decimal point.
Device Connectivity Testing
When a MiSC has been setup on the network, verify connectivity to the device using the following
procedure:
Procedure 2-2 Testing MWR Device Connectivity
1
Apply power to the device, the device should be operation in 60 to 120 seconds
2 Obtain the MEA and 802.11 MAC addresses for the device subcomponents that were recorded in the
MAC Address Table earlier in this manual. The address will be in the format 02-05-12-30-xx-yy.
3
Within MeshManager’s Device Manager screen, right-click on the appropriate MWR device in the
Device Tree and select the
Ping Device option.
4
Check for a successful response to the Ping command in the Named Device results dialog box. A
successful response to the ping commands verifies connectivity to the device (MWR).
5
Repeat steps 1-4 for additional MWR devices.