ML910 R1.0 RF Pass-through Upgrade Procedure, Version A
21
11.
Note that the RF Pass-Through Option will not be applicable under the following conditions:
a. The ML910 does not have RF Pass-Through option installed. RF Pass-Through here refers
to the internal factory-installed RF Antenna Switching Board.
b. The ML910 is being docked in either an ML900 mobile dock or an Office Port Replicator.
12.
The internal antennas will function if User selects the
[RF Pass-Through Off]
in the RF
Pass-Through Mode.
13.
The external antenna option will be available if User selects the
[RF Pass-Through On]
in the
RF Pass-Through Mode.
