16
On the Extension/Wireless unit:
AUTO ANSWER INT
REGISTRATION
2ND CALL ALERT
EXTENSION NAME
NOTE
Some options are system-wide and can only be programmed from the phone while in Main/Wired
mode.
7.4.1 Date/Time
The
DATE/TIME
option only exists in the Main/Wired unit, Extension/Wireless unit Date/Time
should update automatically after it is set in the Main/Wired unit.
From the
PHONE SETTING
menu:
1. Using
VOL +
and
VOL -
of the navigation button to scroll to
DATE/TIME
. Press
SELECT
softkey.
2. The screen displays
YEAR 2011
.
3. Using the dial pad to enter the last two digits of the current year (range: 00 to 99).
4. Press
SAVE
softkey to save the year setting and proceed to the date setting.
5. The screen displays
DATE 01/01
.
6. Using the dial pad to enter two digits for the current month and day respectively
(format: mm/dd).
7. Press
SAVE
softkey to save the month/date setting and proceed to the time setting.
8. The screen displays
TIME
12:00A
.
9. Using the dial pad to enter four digits for the current time and
AM/PM
softkey to toggle
between
P
(pm) and
A
(am).
10. When you are finished, press
SAVE
softkey.
NOTE
If you subscribe to Caller ID service, the current Date/Time is set automatically when you receive
your first CID record and will override manually set Date/Time. However, the Year must still be set
manually. The Year information is not in the CID record.
7.4.2 Auto Answer Intercom
When it is set to On, the unit will auto answer the intercom call when it receives an intercom call.
From the
PHONE SETTING
menu:
1. Using
VOL +
and
VOL -
of the navigation button to scroll to
AUTO ANSWER INT
. Press
SELECT
softkey.
2. Using
VOL +
and
VOL -
of the navigation button to scroll to
ON
or
OFF
.
3. Press
SELECT
softkey to save your selection.
NOTE
The default setting is
OFF
.
7.4.3 Dial Mode
The Dial Mode of Line 1 and Line 2 can be set individually for each line.
From the
PHONE SETTING
menu:
1. Using
VOL +
and
VOL -
of the navigation button to scroll to
DIAL MODE
. Press
SELECT
softkey.
2. Using
VOL +
and
VOL -
of the navigation button to select
TONE
or
PULSE
.
3. Using
PREV
and
NEXT
of the navigation button to select
L1
or
L2
.
4. Press
SELECT
softkey to save your selection.
7.4.4 Area Code
The telephone uses the pre-programmed area code to determine the number format to display
when a valid Caller ID record is received. The pre-programmed area code is also used for the
Dialing Back feature.
From the
PHONE SETTING
menu:
1. Using
VOL +
and
VOL -
of the navigation button to scroll to
AREA CODE
. Press
SELECT
softkey.