Motorola ML25260, Полное руководство пользователя, Страница: 14 / 35

14
NOTE
Before you begin pairing your phones together, you may wish to set them up in the same room.
This will make accessing both phones easier. But don’t worry, you can unplug and move either
phone afterwards.
If you have a Motorola ML25055:
To pair your Motorola ML25055 handset with Motorola ML25260 base phone:
1. Press
REG softkey.
NOTE
If the cordless handset has not been registered to a base, the screen will display PRESS “REG” TO
INITIATE REGISTRATION . Press REG softkey to start the registration.
If the cordless handset does not display the PRESS “REG” TO INITIATE REGISTRATION message, the
REGISTER
option is available in the
PHONE SETTING - REGISTRATION
menu.
2. The handset screen will display PRESS BASE UNIT PAGE BUTTON UNTIL BEEP .
3. Press and hold PAGE MAIN button on the base for about 5 seconds.
The base will display
REGISTRATION
to indicate the base is now in registration mode.
If registration is successful, both phones will beep and display REGISTRATION COMPLETE! . If
registration is not successful, move the phones closer together and try again.
To wirelessly connect your Motorola ML25260 to another Motorola ML25260 or a compatible
Motorola base phone:
You can only wirelessly connect a Motorola ML25260 to another Motorola base phone when the
Motorola ML25260 is in Extension/Wireless mode. To do this:
1. In idle mode, press
MENU softkey to go to the main menu.
2. Press
SELECT
softkey to enter
SELECT MODE
menu.
3. Using VOL + and VOL - of the navigation button to scroll to EXT/WIRELESS .
4. Press SELECT softkey and the phone will remind you that you need to register it to a
base station.
5. Press
SELECT
softkey and the phone will switch to Extension/Wireless mode.
To pair your Motorola ML25260 to a compatible Motorola base phone:
1. Press
REG softkey.
NOTE
If your Motorola ML25260 is not already registered to a base, the screen will display PRESS “REG”
TO INITIATE REGISTRATION . Press REG softkey to start the registration.
2. The screen will display PRESS BASE UNIT PAGE BUTTON UNTIL BEEP and will begin searching for
a compatible Motorola base phone.
3. Press and hold PAGE MAIN or PAGE button on the base phone that is plugged into the phone
jack for about 5 seconds.
If registration is successful, both phones will beep and display REGISTRATION COMPLETE! If
registration is not successful, move the phones closer together and try again.
6.5 Backup Battery Operation
If the power supply cord is not plugged into the base unit, and the battery is available, the unit
enters Battery Operation Mode. In this mode, the base is fully functional.
7 Programming the Phone
7.1 Standby Screen
After powering up the unit for the first time, it will prompt you to select Main/Wired mode or
Extension/Wireless mode. Each system must have one phone on Main/Wired mode and can have
up to 10 other Motorola ML25260 on Extension/Wireless mode. The phone set to Main/Wired
mode must be plugged into a phone line, and the phones set to Extension/Wireless mode must be
registered to the phone set to Main/Wired mode.
The base displays the current date, time and the softkey labels.
The softkey labels will change according to the status of the unit.
The base display has a dedicated
SET CLOCK icon flashing when the clock is not set. Go to
PHONE SETTING - DATE/TIME to set the clock.