![background image](http://html.mh-extra.com/html/motorola/miniblue-h5/miniblue-h5_quick-start-manual_245010002.webp)
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side to
complete
initial setup of
your H5.
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side to
complete
initial setup of
your H5.
Miniblue H5
Bluetooth®
Handsfree Headset
TURNING ON AND OFF
To turn your headset on
, press and hold
the Call
button until the indicator light
flashes.
To turn your headset off
, press and hold
the Call
button until the indicator light
flashes rapidly and then turns off.
To conserve battery power, store your
headset in the included charger base.
Call
Button
Indicator
Light
EARTIPS AND YOUR
HEADSET
Your H5 headset is supplied with both flanged-
and foam-type eartips. The eartip is fitted onto
the end of your headset’s earpiece speaker,
and placed into your ear when using your
headset.
WEARING HEADSET
INSTALLING EARTIP
FLANGED EARTIP
:
Place the earpiece
speaker into your ear.
The eartip should form a
comfortable seal in your
ear.
FOAM EARTIP:
Roll foam between thumb
and forefinger to compact.
Place the earpiece
speaker into your ear and
hold for 10 seconds while
foams expands.
The eartip should form a
comfortable seal in your
ear.
1
2
When installing an eartip, carefully place it onto
the tip of the earpiece speaker.
FOAM EARTIP:
Twist eartip onto
earpiece starting at an
angle and pushing
onto headset.
FLANGED EARTIP:
Pull back largest
flange on eartip.
Twist eartip onto
earpiece starting at
an angle and pushing
onto headset.
1
2
CHANGING VOLUME
BUTTON ORIENTATION
You can also change the orientation of the
volume buttons on your headset.
Turn the headset power off.
Press both the Call button and Volume
button you want to assign as the
"volume up" button until the indicator
light flashes twice.
1
2
To wear your headset, insert the headset’s
earpiece speaker with installed eartip into your
ear.
Call
Button
Indicator
Light
Volume
Buttons
MAKING CALLS
Function
Action
Make a voice dial call
Tap the Call button
and speak the name
after the tone
End a call
Tap the Call button
Receive a call
Tap the Call button
Reject a call
Press and hold the
Call button until you
hear a medium beep
Redial last call
Press and hold the
Call button until you
hear a medium beep
Answer a second
Press and hold the
incoming call
Call button until you
hear a medium beep
(places first call on
hold)
Note: Your H5 supports both Handsfree and Headset Profiles.
Accessing call functions depends upon which profile your
phone supports. See your phone's user's guide for more
information.
MAKING CALLS
CONTINUED
Function
Action
Toggle between two
Press and hold
active calls
the Call button until
you hear a medium
beep
Join a 3-way call
Press and hold
both Volume buttons
until you hear a
medium beep
Put an active call on
Press and hold the
hold or resume a call
Call button until you
on hold
hear a medium beep
Transfer a call from the
Tap the Call button
phone to the headset
Disable or enable the
Press and hold
indicator light
both Volume
buttons until you
hear a low beep
Mute or unmute a call
Tap both Volume
buttons
Note: Some features are phone/network dependent.
INDICATOR LIGHTS
AUDIO TONES
The audio tones provide information about your
headset's status.
Audio Tone
Headset Status
Single high tone when
Volume at minimum
pressing Volume button
or maximum
Five rapid high tones
Low battery
repeated every 20 sec.
No audio indications;
Out of range
deteriorating quality
Ring tone
Incoming call
Single very high
All calls ended
tone
Single high tone
Entering pairing
mode
Tapping Call button
or both Volume
buttons
Single medium tone
Pressing Call button
or both Volume
buttons for 1-2 sec.
Indicator lights provide information about your
headset and charger base status.
Charger Base
Indicator
Status
Charger Battery On
Charging
(
-
)
Flashing Battery low
Off
Charging complete
Headset Battery On
Charging
(
+
)
Off
Charging complete
Headset
Indicator
Status
Off
Power off
On (steady)
Pairing mode
10 rapid flashes
Pairing successful
Slow pulse
Connected (on a call)
Quick flash
Standby (not on call)
Note: After 5 minutes of inactivity, the light stops flashing to
conserve power, but the headset remains in standby mode.
AUDIO TONES
CONTINUED
Audio Tone
Headset Status
Single low tone
Pressing and holding
Call button or both
Volume buttons for
greater than 2 secs.
Single high tone
Phone network not
repeated every 5 sec.
available
Two ascending tones
Mute enabled
Two descending tones
Mute disabled
Four ascending tones
Headset powering
on
Four descending tones
Headset powering
off
Your headset’s performance is greatly
dependent upon achieving a good seal in your
ear. Therefore, we recommend trying all the
supplied eartips with your headset.
To verify you are using the proper eartip, leave
yourself a voicemail and check for optimal ear
seal to ensure good performance.
Flanged Tip
Foam Tip