47
U
si
n
g
th
e
M
en
u
Registering Additional Handsets
Your handset can be registered for use with up to 4 different base stations.
A maximum of 6 handsets can be registered to use with your base station.
Note: Any additional handsets must be GAP compatible. Even if a handset meets GAP
standards, it is still possible some handset functions will not be available.
To register a new handset to your base, you need to put the base into registration mode:
At the base:
1. Press and hold the Page key. The base will beep twice and the orange light will flash
for one minute.
On the handset, in the base settings menu:
1. Press the
or
key to display Register handset and press the
key
to select.
2. Press the
or
key to select the number of the base you want to register the
handset to and press the
key to confirm.
Note: The base stations that your handset is already registered to will be
indicated by **.
3. Enter the handset PIN code and press the
key to confirm.
If the correct PIN is entered, the handset displays Searching while it attempts
to connect with the base station. If registration is successful, OK is displayed.
4. Press the
key to return to standby mode.
Once the registration procedure is complete, the new handset will automatically
be allocated the next available handset number. This number will be shown on
the display.
