manualshive.com logo in svg

Motorola MC145220EVK, Руководство пользователя, Страница: 46 / 56

Поделиться
Скачать
Motorola MC145220EVK Скачать руководство пользователя страница 46

MC145220EVK

MOTOROLA

46

[T]! Set target PLL on board

To access this command in the program, select a board in the “Define boards to program” screen and
then press [Q]! . This will place you in the “Select from the available options” screen. The command [T]!
is on this screen.

See page 21 of this document for a sample screen shot of this command.

This command is only available when the targeted board is a MC145220EVK, and that board is in single
loop mode (see [B]! command). The MC145220EVK contains two PLLs, which are designated PLL and
PLL

′

. This command is a toggle function which directs the program to “steer” subsequent commands to

either PLL or PLL

′

 on the targeted MC145220EVK.

[P] Set output port address

To access this command in the program, select a board in the “Define boards to program” screen and
then press [Q]! . This will place you in the “Select from the available options” screen. The command [P]
is on this screen.

See page 31 of this document for a sample screen shot of this command.

This command prompts the user to input a hexadecimal address of the printer port on their computer.
This address is where the EVK boards are connected. The entered address is displayed on the main
menu next to the [P] command prompt.

[G] Change board definitions

To access this command in the program, select a board in the “Define boards to program” screen and
then press [Q]! . This will place you in the “Select from the available options” screen. The command [G]
is on this screen.

This command returns the user to the board definition screen. The user may then define a different cas-
cade of boards.

[I]! Initialize board(s), write all registers

To access this command in the program, select a board in the “Define boards to program” screen and
then press [Q]! . This will place you in the “Select from the available options” screen. The command [I] is
on this screen.

See page 21 of this document for a sample screen shot of this command.

This command writes out all of the registers for all of the boards that are currently attached to the com-
puter. The current settings are used for the registers.

This correctly writes out the C, R, and A registers for each EVK board connected to the bus. In the case
of MC145220EVKs, they are set to SINGLE (RESET/DEFAULT) mode and then have both PLL and PLL

′

registers written.

[X]! Terminate demonstration program

This command is available on all screens within the program.

This command causes the program to terminate and returns the user to DOS.

[?]! View help screen

This command is available on all screens within the program.

This command displays the help screen.

 

   

  

F

re

e

sc

a

le

 S

e

m

ic

o

n

d

u

c

to

r,

 I

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

 

Freescale Semiconductor, Inc.

For More Information On This Product,

   Go to: www.freescale.com

n

c

.

..

ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005

Содержание MC145220EVK

























































Отзывы:

Нет отзывов