Motorola MC145192EVK, Руководство пользователя

Страница: 14 / 48

MC145192EVK
•
MC145202EVK MOTOROLA
14
Screen #2 ‘Select from the available options’ (continued)
Welcome to MC145xxx EVK Demonstration Program, rev 2.5
Select from the available options
Available Boards – Current target board is: A, MC145190
Brd [A]!: MC145190 Brd [–]!: N/A Brd [–]!: N/A
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
MC145xxx Frequency Commands – Current Output Frequency is
746 MHz
[L]! Set to low freq 741 MHz [W] Change default low freq.
[M]! Set to med. freq 746 MHz [Y] Change default med. freq.
[H]! Set to high freq. 751 MHz [Z] Change default high freq.
[U]! Step frequency up by step size [O] Set PLL output frequency
[D]! Step frequency down by step size [F] Set REFin freq. & channel spacing
MC145xxx Additional Commands
[E] Set function of output A
[N] Change C Register
[R] Set crystal/reference mode – Current mode is Ref. mode, REFout low
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Initialization/System Setup Commands:
[P] Set output port address – Current address is $278
[G] Change board definitions
[I] Initialize board(s), Write all registers
[X]! Terminate demonstration program. [?]! View help screen.