38
4
Select
Delete Number
.
5
Press
o
or press
A
under
Yes
to confirm.
Note:
If an entry contains only one number or
address, deleting the number or address
deletes the entry.
Checking Capacity
To see how many numbers are stored in Contacts:
1
From the Contacts list, press
m
.
2
Select
Capacity
.
Creating Pauses and Waits
When storing a number, you can program your phone to
pause or wait between digits while dialing. A pause makes
your phone pause for 3 seconds before dialing further.
A wait makes your phone wait for your response before
dialing further.
This feature is useful when using voice mail or other
automated phone systems that require you to dial a phone
number and then enter an access number.
To program a pause:
Press and hold
*
until the letter P appears. The P
represents a 3-second pause.
If you store 17035551235P1234, when you select this
number and make a call, your phone dials the first 11 digits,
pauses for 3 seconds, then dials the last 4 digits.
If you want a pause longer than 3 seconds, press and hold
*
more than once. Each P represents a 3-second pause.
To program a wait:
Press and hold
*
until the letter W appears. The W
means your phone waits before dialing further.
If you store 17035551235W1234, when you select this
number and make a call, your phone dials the first 11 digits
and then waits. A message appears asking if you want to
send the rest of the digits. Press
A
under
Yes
to dial the last
4 digits.
Tip:
You can create pauses and waits while dialing a
number from the keypad. See “Creating Pauses
and Waits While Dialing” on page 46.
