Motorola LEX L10ig, Руководство пользователя

Страница: 39 / 194

Return to Process
Charging Information on page 38
2.4.2
Battery Charge Indicators
The Charge and Notification LED at the top front of the LEX device indicates the battery charging and
power level.
Battery charging and power level are indicated also by a battery icon on the status bar.
NOTICE: Before checking the battery charge level, remove the device from any power source
(cradle or USB cable connection).
Figure 9: Charge and Notification LED
Table 2: Charge and Notification LED — Charging Indications
Status Indications
Off Battery is not charging. Could indicate that:
• Device is not inserted correctly in the cradle
• Device is not connected to a USB cable
• Charger or cradle is not powered
Slowly blinking red (once every 2 seconds) Battery power is low (less than 5% power left).
Solid red Charging.
Fast blinking red (once every 0.5 second) Charging error:
• Temperature is too low or too high
• Charging has gone on too long without com-
pletion (typical charge is four hours).
Slowly blinking green (once every 2 seconds) Battery is greater than 90% charged.
Solid green Device is charged.
Slowly blinking blue (once every 4 seconds) A new notification has been received.
Alternately blinking blue (1 second) and red (3
seconds) Device is charging and a new notification is re-
ceived.
Alternately blinking blue (1 second) and green
(3 seconds) Device is charged and a new notification is re-
ceived.
Slowly blinking blue and red (every other sec-
ond) Battery power is low (less than 5% power left)
and a new notification is received.
Alternately blinking blue (1 second) and fast
blinking red (every 0.5 seconds for 3 seconds) A new notification is received during a charging
error.
Table continued…
MN003477A01-A
Chapter 2: Getting Started
Send Feedback 39