3.4
Camera Installation
The camera can be mounted to a pole with two included metal band ties or to a flat surface with two
included lag bolts. The L6Q kit also includes two reusable zip ties to temporarily hold the mounting
bracket in place until the two metal band ties can be secured.
Figure 25: Camera Mounting
3.4.1
Mounting the Camera
Mount the camera no further than 25 feet from the power source to ensure that the power cable can
reach. Test the cable length before tightening the metal band straps.
Procedure:
1
Thread a reusable zip tie through the top slot of the mounting bracket.
2
Place the mounting bracket against the pole and tighten the reusable zip tie to hold it in place.
MN008660A01-AA
Chapter 3 : Hardware Installation
32
