manualshive.com logo in svg

Motorola IDEN LM 3000E, Начало работы

Поделиться
Скачать
Motorola IDEN LM 3000E Скачать руководство пользователя страница 50

51

Handset Operation

Adding a Handset to your mobile will give you increased functionality such
as Phone Operations and Message Mail.  See the Handset Manual (LM2000)
to learn all the basic features of the Handset.  When the handset is used with
the Advanced Feature Mobile, all functionality is routed to the handset.  
This section explains how the handset works when it ships from the factory.
Many features are programmable by your organization.  Be sure to refer to
your organization’s instructions to find out the differences.

Emergency Group Call

Emergency Group Call - Provides priority access to talkgroup members, and
provides visible and audible indications of an emergency condition. The
emergency call will take place on a pre-programmed emergency talkgroup or
the last selected talkgroup (depending on how the radio is programmed). 

Note: The Emergency Key is still operable from the mobile keypad.  The
handset Emergency Key is the upper most key on the PTT side.

Emergency Key

PTT Button

Location of Emergency Key on Handset

Status Message

Status Message - Allows you to send a Status Message to the dispatcher, or
to the target ID of your choice. Status Messages like “AT LUNCH” and “EN
ROUTE” can be programmed and sent. Up to 10 named (aliased) Status
Messages are available per unit.

Содержание IDEN LM 3000E














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды