81
D R A F T
Accessories
Desktop Charger
The NTN8653 Desktop Rapid Charger charges Motorola authorized
batteries, as listed on page 78, for the i1000-A.
Charging a Battery
Figure 4. Desktop Rapid Charger
1. Plug the flat end of the power-supply cord, with the
logo facing
down, into the receptacle on the back of the charger.
2. Plug the transformer end of the power-supply cord into any
standard AC wall outlet. The charger performs a quick power-up
self-test, during which the LED indicators will flash green once
to indicate a successful power-up.
3. Insert an i1000-A with an attached battery, into the charger's front
pocket. This is done by inserting the bottom of the i1000-A onto
the pin connector in the bottom of the charger's front pocket.
4. If the phone is properly seated in the front pocket, the charger’s
front pocket LED indicator will light to indicate that the battery is
being charged. (If a battery is in the rear pocket and the phone
with a battery is inserted into the front pocket, the rear pocket’s
LED flashes yellow, indicating that its battery is waiting to be
charged.)
5. The charger has the capability of displaying the battery’s charge
status. The indicator will show the following: solid red=1-30%;
solid yellow=31-60%; flashing green=61-90%; solid green=91-
100%.
Desktop Battery Charger Troubleshooting
If the battery is not charging and there is:
Rear Pocket
Front Pocket
Pin Connector
Power supply cord receptacle
LED
Indicator
Содержание iDEN i1000-A
Страница 97: ...92 D R A F T ...
Страница 98: ...93 Safety and General Information D R A F T ...