Motorola HH1620, Руководство пользователя

Страница: 13 / 88

Overview
Hint: Your modem should remain off for about 10 minutes to “clear its memory” so it can
tion
4.
ne end of the blue Ethernet cable to the Ethernet port on your modem.
d
the rear panel of your voice gateway.
6.
7.
n
Note: If your high-speed Internet connection was through USB and your computer does
s. You can purchase additional Ethernet
cables from any electronics or computer retailer.
8.
efer to
IMPORTANT: Before you continue, be sure to allow enough time for your modem to
d Online lights are on and no longer
9.
ts
rear panel.
10.
described in “Front
Panel” on page 3. You should not unplug your voice gateway when it is not in use.
ugh time for your voice gateway
complete its start-up process. HH1620 startup is complete when the Power light on its
s
Power, Ethernet 1, and
, or Mozilla Firefox®.
recognize the HH1620 when you turn it back on. You can continue with the installa
during this time.
Connect o
5.
Connect the other end of the blue Ethernet cable to the blue Ethernet port labele
Internet on
Connect one end of the yellow Ethernet cable to the Ethernet 1 port on your voice
gateway.
Connect the other end of the yellow Ethernet cable to the Ethernet port on your
computer.
Hint: Your modem should remain off for about 10 minutes to “clear its memory” so it ca
recognize the HH1620 when you turn it back on. You can continue with the installation
during this time.
not have an Ethernet adapter, see “Troubleshooting” on page 66 for information.
Optionally, you can connect up to three more computers directly to the other HH1620
Ethernet ports (2, 3, or 4) using Ethernet cable
Plug your cable or DSL modem power cord or adapter into an AC power outlet. R
the instructions provided with the modem.
complete its start-up process. Refer to the information provided by the modem
manufacturer. For example, startup for a Motorola SURFboard cable modem is
complete when its Power, Receive, Send, an
flashing.
Connect the power adapter supplied with your voice gateway to the Power port on i
Plug the other end into an AC power outlet.
This turns on your voice gateway. The HH1620 does not have an On/Off power switch.
The Power light on the front panel performs a series of blinks as
IMPORTANT: Before you continue, be sure to allow eno
to
front panel lights solid green. This usually takes a few minutes.
We recommend plugging the HH1620 power adapter into an electrical outlet that i
grounded and equipped with a surge protector or
UPS .
11.
Turn on your computer. The Ethernet 1 light on the HH1620 front panel should light.
IMPORTANT: Before you continue, be sure the HH1620
Internet lights are all on.
12.
On your computer, open a Web browser such as Microsoft Internet Explorer, Netscape
Navigator®
HH1620 Wireless VoIP Gateway
User’s Guide
6