Motorola GP2000 Скачать руководство пользователя страница 38

Страница: 38 / 102

4-4

Programming Mode

4.0

Programming Mode

4.1

Introduction

This mode allows you to edit a number of features to enhance the use of this radio.

4.2

Entering Programming Mode

If the radio is turned on, turn it off. Press and hold the

MON

, and turn on the radio. A ringing tone is

heard, which indicates that the radio is in Programming Mode. The

indicator is displayed.

4.3

Exiting Programming Mode

To exit Programming Mode, turn off the radio.

4.4

Accessing Programming Mode Parameters

In Dealer ConÞguration, Programming Mode parameters are grouped into three main categories:
RW (Radio Wide), Channel (001 to XXX

) and VFO (Variable Frequency Operation).

Use + or - buttons, to move from one category to another.

ßà

CH 001

ßà

CH 002

ßà

CH XXX

ßà

VFO

NOTE:

Radio operating in User ConÞguration is only restricted to RW parameters.

Once you have selected the category, and wish to view its parameters, use PTT or

MON

to move

from one parameter to the other, as shown in the next diagram.

1. XXX denotes the maximum number of channels supported by your radio model.

Содержание GP2000







































































































Результаты поиска

Содержание GP2000

Отзывы:

Motorola GP2000, Руководство по обслуживанию, Страница: 38 / 102

Результаты поиска

Содержание GP2000

Отзывы: