Motorola GM1200E Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 104

background image

Introduction

Introduction

1-1

1.0

Introduction

This chapter outlines the scope and use of the detailed service manual and provides an overview of
the warranty and service support.

2.0

Scope of Manual

This manual is intended for use by experienced technicians familiar with similar types of equipment.
It contains level 3 service information required for the equipment described and is current as of the
printing date. Changes which occur after the printing date maybe incorporated by a complete
Detailed Service Manual revision or alternatively as additions, for example, to Band Specific
information.

3.0

How to Use This Manual

The detailed service manual contain an introductory chapter giving information on warranty and
support. Chapter 2 contains level 3 service information for the control head . Chapter 3 details level
3 service information for the radios in band specific sub-chapters each containing theory of
operation and schematics/parts lists. Refer to the Table of Contents for a general overview of the
manual.

4.0

Warranty and Service Support

Motorola offers long term support for its products. This support includes full exchange and/or repair
of the product during the warranty period, and service/ repair or spare parts support out of warranty.
Any "return-for-exchange" or "return-for-repair" by an authorised Motorola Dealer must be
accompanied by a Warranty Claim Form. Warranty Claim Forms are obtained by contacting an
Authorised Motorola Dealer.

4.1

Warranty Period

The terms and conditions of warranty are defined fully in the Motorola Dealer or Distributor or
Reseller contract. These conditions may change from time to time and the following notes are for
guidance purposes only.

In instances where the product is covered under a "return for replacement" or "return for repair"
warranty, a check of the product should be performed prior to shipping the unit back to Motorola. To
ensure the product has been correctly programmed or has not been subjected to damage outside
the terms of the warranty.

Prior to shipping any radios back to the appropriate Motorola warranty depot, please contact
Customer Services. All returns must be accompanied by a Warranty Claim Form, available from
your Customer Services representative. Products should be shipped back in the original packaging,
or correctly packaged to ensure no damage occurs in transit.

1

«
...
9
10
11
12
13
...
»

Содержание GM1200E









































































































Отзывы:

Нет отзывов

Похожие инструкции для GM1200E

Бренд: Midland Страницы: 64

Бренд: ICP DAS USA Страницы: 21

Levelflex FMP53 PROFIBUS PA

Бренд: Endress+Hauser Страницы: 36

Бренд: Ubiquiti Страницы: 36

Бренд: Radio Shack Страницы: 12

Бренд: Sangean Страницы: 80

Бренд: Radio Shack Страницы: 9

Бренд: Uniden Страницы: 23

Бренд: Jensen Страницы: 14

Бренд: Baofeng Страницы: 25

microTALK CXT125

Бренд: Cobra Страницы: 1

Бренд: Cobra Страницы: 22

Бренд: Motorola Страницы: 756

Бренд: Garmin Страницы: 57

Бренд: Vertex Standard Страницы: 20

Бренд: Alinco Страницы: 36

Бренд: Advanced Wireless Communications Страницы: 2

Бренд: DMB Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды