Motorola FR68 Series, Руководство пользователя, Страница: 22 / 142

Getting Started
20
Table 1-2
LED Charge Indicators
Charging/Battery
Status LED
Indication
Off FR68 Series is not charging.
FR68 Series is not inserted correctly in the cradle or connected to a
power source. Charger/cradle is not powered.
Slow blinking amber
FR68 Series is charging.
Solid green Charging complete.
Note: When the battery is initially inserted in the FR68 Series, the amber
LED flashes once if the battery power is low or the battery is not fully
inserted.
Fast blinking red Charging error, e.g.:
z
Temperature is too low or too high.
z
Charging has gone on too long without completion (typically eight
hours).
Single blinking amber
(when device is turned on)
Battery depleted.
Fast blinking amber
Battery over-temperature condition.
Charging Spare Batteries
See
Chapter 8, Accessories
for information on using accessories to change spare batteries.
Charging Temperature
Charge batteries in temperatures from 0°C to 45°C (32°F to 113°F). Charging is intelligently controlled
by the FR68 Series.
To accomplish this, for small periods of time, the FR68 Series or accessory alternately enables and
disables battery charging to keep the battery at acceptable temperatures. The FR68 Series or
accessory indicates when charging is disabled due to abnormal temperatures via its LED. See
Table
1-2 on Page 20
.
Powering On the FR68 Series
Press the
Power
button to turn on the FR68 Series.
When turning the FR68 Series on for the first time, the splash screen displays for about a minute as
the FR68 Series initializes its flash file system, then the calibration window appears. Note that these
windows also appear upon cold boot.
NOTE When the FR68 Series powers up after inserting a battery for the first time, the device boots and
powers on automatically.
Calibrating the Screen
To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:
1
.
Remove the stylus from its holder on the back of the FR68 Series.
2
.
Carefully press and briefly hold the tip of stylus on the center of each target that appears on the
screen.
3
.
Repeat as the target moves around the screen, then tap the screen to continue.