Motorola FR68 Series Скачать руководство пользователя страница 119 | Manualshive

Страница: 119 / 142

Motorola FR68 Series Скачать руководство пользователя страница 119

Accessories

117

Table 6-2

Spare Battery LED Charging Indicators

LED

Indication

Off

No spare battery in slot; battery is not charging; battery is not inserted correctly in
the charger; charger is not powered.

Slow Blinking
Amber

Spare battery is charging.

Solid Amber

Charging complete.

Headset

Use the headset to communicate via Voice-Over-IP (VOIP) or for audio playback and telephony
applications. To connect the headset, remove the plug from the headset jack at the top of the
FR68 Series and insert the headset connector. Contact a Motorola representative for compatible
headsets.

For best performance, Motorola recommends a 2.5mm jack headset, p/n 90-17C28-001R.

Figure 8-5

Headset Connection

Cables

This section describes how to set up and use the cables. The cables are available with a variety
of connection capabilities.

The following communication/charge cables are available:

z

USB Client Charge cable (standard-A connector and a barrel receptacle for power)

z

Auto charge cable

z

Charge only cable.

Communication/charge cables:

z

Provide the FR68 Series with operating and charging power when used with the Motorola
approved power supply.

z

Synchronize information between the FR68 Series and a host computer.

z

Provide USB connection through the USB pass-through port for communication with a USB
device, such as a host computer.

«
...
117
118
119
120
121
...
»

Содержание FR68 Series















































































































































Отзывы:

Нет отзывов