Monitor Unit Menu Options
21
ENGLISH
4.5
Alarm
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until
is highlighted.
3.
Press the
+
UP button or
-
DOWN button to select the alarm time
(
6h
,
4h
,
2h
). (The default setting is Alarm OFF.)
If an alarm time is selected, the Monitor unit will beep for about
45 seconds after every 6, 4 or 2 hour period, and the
alarm icon will
flash red.
4.6
Camera Control
4.6.1
Add (pair) a camera
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until
is highlighted, and
the
/
/
/
menu will pop up.
3.
Press the
+
UP button or
-
DOWN button to select
, and press the
OK
button to confirm.
4.
1 /
2 /
3 /
4 will pop up, press the
+
UP button or
-
DOWN
button to select the desired CAM, and press the
OK
button to start
searching for a camera unit. The green audio level LED will flash rapidly
while searching.
5.
Press and hold the PAIR button underneath the Indoor Camera Unit until
the Monitor unit finds the camera, beeps and the picture from the camera
appears.
NOTE
A camera can only be registered to one Monitor unit at any one time.
4.6.2
View a camera
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until
is highlighted and
the
/
/
/
menu pops up.
3.
Press the
+
UP button or
-
DOWN button to select
, and press the
OK
button to confirm.
4.
1 /
2 /
3 /
4 will pop up, press the
+
UP button or
-
DOWN
button to select desired CAM, and press the
OK
button to view the picture
from that camera.
