Motorola DSR-4550 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 98

Motorola DSR-4550 Скачать руководство пользователя страница 63

DSR-4550

53

Operating the DSR-4550

Status5 Menu

Note: This menu is not displayed when the active signal is received from a source
other than the L-band input connector.

Press the



buttons until the Status5 menu appears (shown below). This screen

displays the sync status, Eb/No (signal to noise ration) and authorization state of
the DSR-4550.

Sync Field

This field displays the acquisition Sync state. The Sync state for the active L-band
signal is either Paused, Tuning, or Locked. The unit presents Paused for sync state
0-2, Tuning for sync state 3-4, and Locked for sync state 5-9. Three dashes (---)
indicate that no information is available.

Eb/No Field

This field displays the Signal to Noise Ration (Eb/No (for the active L-band signal.
Three dashes (---) indicate that no information is available

Authorize State Field

This field displays the authorization state (either Authorized or Not Authorized). If the
Authorization State is shown as Not Authorized, the field alternately flashes and
displays the reason why it is not authorized (i.e., Missing Map, Undefined Channel,
Undefined Service, Not In Sync, No Program Rekey, No Working Key, No Event
Blackout, No Category Key, Old Category Seq, Subscrb With Tape, Subscrb w/o Tape,
Bad Seed Chksum, Bad Debit Chksum, Not Subscribed, Regional Blackout, or Circular
Blackout.

Three dashes (---) indicate that no information is available.

E Tuning -2.0 ---



STATUS5 Sync Eb/No Authorize State

Read-only

Read-only

Read-only

«
...
61
62
63
64
65
...
»

Содержание DSR-4550



































































































Отзывы:

Нет отзывов