Motorola DSR-4550 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 98

Motorola DSR-4550 Скачать руководство пользователя страница 62

3

52

Status4 Menu

Note: This menu is not displayed when the active signal is received from a source
other than the L-band input connector.

Press the



buttons until the Status4 menu appears (shown below). This screen

displays the satellite name and signal tuning characteristics and provides mode-
specific information depending upon the acquisition mode selected (i.e., DCII-
AUTO, DCII-MAN, DVB-MAN, etc.).

Sat Field

This field displays the satellite reference name (two to four alphanumeric
characters) from the downloaded network information. Three dashes (---) are
displayed when no information is available.

Freq Field

This field displays the downlink frequency (range: 950.00 - 2150.00 MHz) of the
L-band signal. This may be different from the frequency that was initially set in the
Manual Tune menu. Three dashes (---) are displayed when no information is
available or that the ASI input is in use.

Symb Field

This field displays the symbol rate (megasymbols per second) of the L-band signal
based on the received signal. Three dashes (---) indicate that no information is
available or when the ASI input is in use.

Code Field

This field displays the code rate (error control coding for forward error correction)
of the received L-band signal. Three dashes (---) indicate that no information is
available or the ASI input is in use.

Format Field

Note: This field is excluded from the status display screen when the acquisition
selection mode (see "Modulation Menu" on page 21) is DCII-DVB.

This field displays the format (combined or split) of the L-band signal. Three
dashes (---) are displayed when no information is available or when the ASI input
is in use.

E --- --- --- --- ---



STATUS4 Sat Freq Symb Code Format

Read-only

Read-only

Read-only

Read-only

Read-only

«
...
60
61
62
63
64
...
»

Содержание DSR-4550



































































































Отзывы:

Нет отзывов