Motorola DCX3200 P2, Руководство по установке

Страница: 47 / 77

4 DIAGNOSTICS
39
1. When in the OOB Receiver Status Diagnostic, press the MENU button on the
remote control to enter the frequency selection mode. The OSD displays a new
“MAN FREQ” line at the bottom of the screen, which indicates the last known
carrier frequency. At this point, if desired, exit the frequency change mode by
pressing the MENU key a second time.
2. Use the UP/DOWN channel or cursor keys on the remote control to scroll through all
10 frequencies until the desired new OOB frequency is found. The new frequency
selections appears on the “MAN FREQ” line of the OSD.
3. When the desired new frequency has been selected, press the SELECT key on the
remote control to start the search. The manual frequency search lasts up to 40
seconds. On the OSD, the “MAN FREQ” line of text is cleared, the “HUNT MODE”
will display “FIX” to indicate a search on a fixed frequency, and the “OOB FREQ”
field changes to the frequency being searched for.
4. If the frequency is found with the proper EMM Provider ID, the OSD “LKC” field
changes to display the new frequency.
5. If after 40 seconds the frequency search is not successful, the product will perform
a warm reset.
6. To abort a search without waiting the 40 seconds, press the
POWER
key on the
remote control to cause an immediate warm reset.
In-Band Status
This diagnostic displays the in-band status for the last attempted tuned channel on the
OSD. The information is updated every 5 seconds.