Motorola CPEI 775 Series Скачать руководство пользователя | Manualshive

Страница: 52 / 58

background image

68P09301A65-A

7-1

FEB 2009

Important Safety and Legal Information

7

Chapter 7: Important Safety and Legal

Information

Your Motorola WiMAX Wireless Broadband Gateway is designed and tested to comply
with a number of national and international standards and guidelines (listed below)
regarding human exposure to RF electromagnetic energy.

This Product complies with the following RF energy exposure
standards and guidelines:

• United States Federal Communications Commission, Code of Federal Regulations;

47CFR part 2 sub-part J

• American National Standards Institute (ANSI)/ Institute of Electrical and Electronic

Engineers (IEEE) C95 1-2005

• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio

frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz,
1999

• Australian Communications Authority Radiocommunications (Electromagnetic

Radiation - Human Exposure) Standard, 2003

• ANATEL ANNEX to Resolution No. 303 of July 2, 2002 “Regulation of Limitation of

Exposure to Electrical, Magnetic, and Electromagnetic Fields in the Radio
Frequency Range Between 9 kHz and 300 GHz” and “Attachment to Resolution
#303 from July 2, 2002”

RF Exposure Compliance and Guidelines Operating Instructions

To comply with FCC RF energy exposure requirements, this Gateway desktop
transmitter should be operated at a minimum separation distance of 20 cm from all
persons.

For additional information on exposure requirements or other training information,
visit http://www.motorola.com/rfhealth

FCC Regulatory Information

The 3.5GHz WiMAX device (Model Name: CPEi35775) complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received;
including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However there is no guarantee that
interference will not occur in a particular installation, which can be determined by
turning the equipment off and on, the user is encouraged to try to connect the
interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.

«
...
50
51
52
53
54
...
»

Содержание CPEI 775 Series



























































Отзывы:

Нет отзывов

Похожие инструкции для CPEI 775 Series

Бренд: F5 Страницы: 2

Бренд: F5 Страницы: 90

Бренд: F5 Страницы: 47

Бренд: Quantum Страницы: 20

Бренд: Raritan Страницы: 4

Бренд: Lanner Страницы: 109

Бренд: Allied Telesis Страницы: 1

Бренд: H3C Страницы: 12

Бренд: ZyXEL Communications Страницы: 299

PoleVault System A/V Source Inputs

Бренд: Extron electronics Страницы: 4

Dimension ES-3124

Бренд: ZyXEL Communications Страницы: 228

Бренд: Garland Страницы: 43

Бренд: Eneo Страницы: 68

Бренд: UfiSpace Страницы: 34

Бренд: Galaxy Страницы: 30

Бренд: WABCO Страницы: 29

Бренд: BEC Страницы: 159

Бренд: Allied Telesis Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды