9
Desktop CPEi 300 User Guide
Easy Setup
The CPE is easily set up in your home. Basic installation equipment
needed are the power adapter and cord, Ethernet cable, a PC or lap-
top computer and the CPE device. If you want to use the VoIP func-
tionality, you will also need an RJ-11 phone cable and a telephone.
Perform the following tasks before attaching the power cord or
powering up the unit:
•
Stand the CPE on a flat surface.
•
Plug the power adapter into the power connector on the back
of the unit.
•
Plug the AC power cord into an AC outlet. The unit will turn
on.
•
Plug one end of the Ethernet cable into the Ethernet
connector on the back of the unit.
•
Plug the other end of the Ethernet cable into the Ethernet
connector of your computer.
•
To use VoIP functionality of the phone, plug one end of the
phone line into the activated phone connector on the back of
the unit. Phone line activation is dependent upon your
service contract.
•
Plug the other end of the phone line into the phone line
connector of your telephone.
