Motorola ComCenter
Page 3
3.0 How-to:
3.1 Main Screen
Figure 1 shows the main screen that will appear on your Palm™ when the program is
running.
Figure 1.
The first time you run
ComCenter
, you will be greeted with the QuickTips screen. It
shows helpful tips on how to use
ComCenter
. If you wish to prevent QuickTips from
appearing each time you run
ComCenter
, check the Don’t Show box.
ComCenter
will search for a valid
Motorola
phone when first started. When the phone
is connected to the Palm™ via the appropriate cable, and powered on, the phone will
display
Motorola [GSM/CDMA/TDMA]
. If the phone is not connected or powered on,
ComCenter
will display
No Device Found
.
After
ComCenter
finds a valid phone, it will automatically create a Connection profile
(“Motorola P2K phone”) and a Network profile (“MotorolaNet”). If you change phones,
ComCenter will automatically detect this, and make updates as necessary to the
Connection profile. In order to make a data call for the first time, you will need to
configure the Network Profile for your Internet Service Provider (See section 3.6.2).