Motorola CLP1010 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 56

background image

RADIO OVERVIEW

11

Dynamic Talkaround Scan (*)

"Dynamic Talkaround Scan" is a simple but
effective method for an on-site repeater enabled
two-way radio systems to maximize
communication coverage. This feature can be
enabled on a repeater channel via the Customer
Programming Software (CPS). The Dynamic
Talkaround Scan gives the radio the ability to scan
both the transmit and receive frequencies of a
repeater channel.

Note:

(*) Enhancement feature on CLP Radios. May not
be available on previous shipping radios. The
Dynamic Talkaround Scan is given higher priority
then the Scan Mode. If the Dynamic Talkaround
Scan and Scan is enabled on the home channel,
then the radio can only support the Dynamic
Talkaround Scan.

Sending Call Tone (enabled through CPS)

1.

Press the Menu button to navigate to Call Tone.

2.

Press either “+/-“ button to transmit selected
Call Tone.

Note:

There are 4 Call Tones available.

Mute Feature (*)

You can quickly lower the headset volume using
the Mute feature.

1.

Press and hold + or - button while receiving
audio to quickly lower the headset volume to
“Mute Headset Volume” setting (configurable via
CPS). You can hear the voice prompt: "Mute"

2.

To switch back to the previous headset volume
setting, press and hold + or - button again. You
can hear the voice prompt: "Unmute".

Note:

(*) Enhancement feature on CLP radios. May not
available on previous shipping radios. The
enhanced CLP does not support the volume scroll
like the previous CLP models.

Talk Permit Tone (*)

In mixed fleet situations (CLP1010 or CLP1040 and
CLP1060), Bluetooth users may miss some words
due to the Bluetooth connection not being
established. Talk Permit Tone allocates some time so
that the link between the radio and headset gets
reestablished thus minimizing the lost words. (The
Talk Permit Tone is disabled by default on CPS on the
Bluetooth models).

Note:

(*) Enhancement feature on CLP radios may not be
available on previous shipping radios.

«
...
17
18
19
20
21
...
»

Содержание CLP1010

























































Отзывы:

Нет отзывов

Похожие инструкции для CLP1010

Бренд: Q-Mac Страницы: 62

Бренд: Ecom Instruments Страницы: 35

Бренд: Memorex Страницы: 10

Бренд: Ranger Electronic Страницы: 11

Бренд: ToooAir Страницы: 7

MARINE MR HH330 FLOAT

Бренд: Cobra Страницы: 35

Бренд: Tait Страницы: 146

Бренд: Icom Страницы: 37

Бренд: Uniden Страницы: 32

Бренд: OXX Digital Страницы: 12

PRODIGI RDR2750

Бренд: RCA Страницы: 13

Бренд: CPS Страницы: 10

Бренд: Retro-Lux Страницы: 9

Бренд: HAEGER Страницы: 24

Бренд: Hama Страницы: 64

Бренд: Radio Shack Страницы: 7

Бренд: Radio Shack Страницы: 4

SAME WEATHERADIO

Бренд: Radio Shack Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды