Motorola CA50, Руководство для разработчиков и пользователей

Страница: 75 / 542

CA50 Modes of Operation 4 - 27
UCAPing This application can be used to verify that the device can reach another device and record the
response time.
To ping another device from your CA50 device:
•
On the CA Menu, scroll to select Programs > UCAPing. The application executes
and the UCAPing Version screen displays for 2 seconds.
1.
The Ping IP Address Entry screen follows the Version screen.
a.
Enter the IP address of the device to ping by using the Up and Down arrows to
modify a number and the left soft key to move the cursor to the next number to
modify. Continue until the appropriate IP address displays.
Note: You must enter all 12 digits for an IP address. For example, the IP address
10.1.14.128 should be entered as 010001014128.
2.
When the IP address is complete press the Scan/Select key to start pinging.
3.
During the Ping operation, the following screen displays.
4.
Press the left soft key (Stop) to suspend current Ping activity. On the Stop status screen
press the left soft key again to reset the counters and continue pinging.
5.
Press the right soft key to exit the Ping application.
Airbeam Client For detailed information about the AirBEAM Client, refer to Airbeam documentation.
Settings
Backlight Settings Press Scan/Select to modify the setting below; press Up/Down keys to scroll options list.
•
Disable/Enable Backlight
•
Brightness Level (of the display): Dimmest; Dim; Bright; Brighter; Brightest
•
Backlight Timeout: 2 sec; 5 sec; 10 sec; Always On
•
On with Keypress: Yes; No
Table 4-6
CA Menu Options (Continued)
Menu Description
UCAPing V X.X
Next #
Ping
Exit
1 5 7 2 3 5 0 2 0 2 4 6
Next #
Ping
Exit
1 5 7 2 3 5 0 2 0 2 4 6
Stop
Ping
Exit
157.235.20.246
18 mS - 19 mS
97 Rx - 0 TO
ping IP address
current ping response
time in milliseconds
average response time in milliseconds
total ping responses
received (Rx)
ping Time Outs (TO)
Continue
Ping
Exit
30 mS Avg
4 Mn - 285 Mx
1021 Rx - 0 TO
minimum ping response
time in milliseconds
average response time in milliseconds
Total ping responses
received (Rx)
ping Time Outs (TO)
maximum ping response time in
milliseconds