Motorola C25 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 50

Motorola C25 Скачать руководство пользователя страница 33

6881039B15

August 01, 2001

29

Level 1 and 2 Service Manual

Disassembly

PRELIMINARY

Removing and Replacing the Earpiece Speaker

1.

Remove the battery, SIM, rear housing, and transceiver board as described in
the procedures.

2.

Using the flat end of the disassembly tool, pry the earpiece speaker from its
cavity in the front housing.

3.

To replace the earpiece speaker, remove the protective backing from the new
earpiece speaker, then press the earpiece speaker into place in its front housing
cavity. Be sure the speaker is straight, fully seated within the cavity, and
positioned so its terminals will contact the transceiver board when reassem-
bled.

4.

Replace the transceiver board, rear housing, SIM, and battery as described in
the procedures.

T191_speaker_rem.eps

Figure 17. Removing the earpiece speaker

G

The earpiece speaker is fastened to the front housing with adhesive. Exercise care
when removing to prevent damage to the front housing.

EARPIECE

SPEAKER

FRONT HOUSING

DISASSEMBLY TOOL

«
...
31
32
33
34
35
...
»

Содержание C25



















































Отзывы:

Нет отзывов