Motorola C25 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 50

Motorola C25 Скачать руководство пользователя страница 12

8

August 01, 2001

6881039B15

Product Overview

Product Family C25 and C43

PRELIMINARY

event that no caller identification information is available, the message INCOMING
CALL is displayed.

Call Forwarding

Call forwarding is a network feature that diverts incoming calls to another phone
number if the user or phone is unavailable, or the user does not wish to receive calls.
This option can be used to:
• Divert all incoming voice calls unconditionally
• Divert incoming voice calls whenever the phone is unavailable, busy, not reach-

able, or not answered

• Divert incoming fax calls
• Divert incoming data calls
• Allow all calls through to the phone.

Detailed operating instructions for these and the other PF C25 and PF C43 features
can be found in the appropriate PF C25 and PF C43 telephone user’s guide listed
in the “Related Publications” section toward the end of this manual.

User must subscribe to a caller line identification service through their service
provider.

«
...
10
11
12
13
14
...
»

Содержание C25



















































Отзывы:

Нет отзывов