Motorola BSR 2000, Руководство по настройке и управлению

Страница: 57 / 650

Release 1.0 Configuring the System
526360-001-00 Rev. B MGBI 3-7
MOT(config)#
hostname <
WORD
>
where:
WORD
is the new system network name.
After you execute this command, the Command Line Interface (CLI) prompt changes
to the new host name:
newhostname(config)#
Configuring User Login Accounts
Define a unique system login account for each user requiring access to the command
line interface. You can define a system login account with different levels of security
access to the system. The
username command allows you to define a complete
system login including the user name, password, access-level, and user group.The
following commands are used for defining a user account:
username nopassword
username password
username privilege
username user-group
Table 3-1 gives a brief description of each parameter required to configure a user
login account. The sections that follow describe the procedural details for defining
each parameter.
Table 3-1 User Login Account Parameters
Parameter Description
username Defines the name of the user account.
A user name comprises a unique set of up to 16
case-sensitive characters.
nopassword Defines no password for the user account.
password Defines the password for the user account.
A password comprises a unique set of up to 31
case-sensitive characters - enclosed with double quotes
if the password contains spaces). The "%" and "!"
characters must not be used.
The password can be specified to appear encrypted or
unencrypted in the running-config file.