Managing ACC Services and Storage
On the
Server
panel use the:
l
General pane:
To...
Do this...
Shut down all the services before you shut
down the device.
Click
Stop
.
Start up all the services after they have been
shut down.
Click
Start
.
Format the storage drive.
Click
Reinitialize
to delete all configuration and
recorded video data.
l
Network Storage Management pane:
To allow users to archive video from this device using the ACC Client software:
1. Click
Enabled
.
2. From the Protocol drop down list, select one of the following:
l
CIFS
— Common Internet file system. The network path is typically in this format:
//
<hostname or IP>
/
<path>
l
NFS
— Network file system. The network path is typically in this format:
<hostname or
IP>
:
<path>
3. In the
Network Path
field, enter the path to the preferred video archiving location.
4. If the network location requires authentication, enter the credentials in the Username and
Password fields.
5. Click
Apply
.
l
Service and RTP Ports panes
To change the UDP and TCP ports used to communicate with the appliance:
l
In the Service Ports pane, enter the
Base
value to use for the HTTP, HTTPS, and UDP ports and
click
Apply
. The list of ports is updated.
l
In the RTP Ports pane, enter the
Base
value to use for the UDP ports and click
Apply
. The
range of ports available for RTP is updated.
Important:
These changes can only take effect after the system restarts. When you are
prompted, allow the system to restart.
Providing Service Logs for Support
Use the Logs page to view service logs. The logs are typically requested by Avigilon Technical Support to
Managing ACC Services and Storage
21
