Motorola ASTRO SRX 2200 Series Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 112

background image

low illumination backlight to allow the user to operate
the radio with the goggles on.

Caution:
Remove your NVG if you operate the radio in
non-NVG compatible display mode. Wearing
the NVG to operate in non-NVG compatible
display mode might injure your eyes.

Accessory connected to the radio that is in NVG
display mode such as Display Remote Speaker
Microphone (DRSM) has its backlight always in off
state.

Intelligent lighting indicators, TX LED and RX LED are
all disabled on both the radio and the connected
accessory when the radio is in NVG display mode.

Note:
Get familiar with your radio NVG feature and
operation before you use it with your Night
Vision Goggles.

Please refer to your agent or qualified radio
technician to enable this feature through CPS
configuration.

Locking and Unlocking the Controls

You can lock the programmable buttons, switches,
and rotary knobs of your radio to avoid inadvertent
entry. Check with your dealer or qualified technician
for best selection to suit your usage.

1 Toggle the preprogrammed Keypad/Control Lock

button or switch to on.
The display shows

CTRL LCK

.

2 Toggle again to unlock the controls.

Turning Voice Mute On or Off

You can enable and disable voice transmission, if
needed.

Turning Voice Mute off or on via the
preprogrammed Voice Mute button:

a) To turn the feature off or on, press the

preprogrammed Voice Mute button.

The display shows momentary

VMUT OFF

, and you

hear a short tone, indicating that the feature is
disabled or the display shows momentary

VMUT ON

,

and you hear a short tone, indicating that the feature
is enabled.

Advanced Features

79

English

«
...
79
80
81
82
83
...
»

Содержание ASTRO SRX 2200 Series

















































































































Отзывы:

Нет отзывов

Похожие инструкции для ASTRO SRX 2200 Series

Бренд: Radio Shack Страницы: 1

Бренд: Weelko Страницы: 13

Бренд: Radio Shack Страницы: 40

Бренд: Palstar Страницы: 2

Бренд: TechniSat Страницы: 112

Бренд: Cobra Страницы: 19

Бренд: Motorola Страницы: 452

Бренд: Motorola Страницы: 4

Tectalk FM PMR 446

Бренд: ALAN Electronics Страницы: 34

Бренд: Hyundai Страницы: 32

Бренд: Maycom Страницы: 18

Бренд: Medion Страницы: 140

Бренд: Medion Страницы: 162

Бренд: Medion Страницы: 130

Walkman SRF-M97

Бренд: Sony Страницы: 3

Бренд: La Crosse Страницы: 8

Бренд: Sailor Страницы: 17

Бренд: Team Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды