Motorola Astro Dimetra MTP Скачать руководство пользователя страница 46

Страница: 46 / 76

Figure 14 Reassembling the Universal Subassembly

19. Align the hole in the universal header subassembly with the pin

in the pocket and the hole in the link to the chassis boss. Push the
universal header subassembly fully downward and under the
corner of pocket actuator.

20. Insert the RF connector (mini-UHF or BNC type) into the slot in

the chassis. Make sure that the washer is inserted in the slot and is
making a positive ground connection.

21. Insert the coaxial cable into the retaining feature on the chassis.

Completing the Console
Reassembly

22. Insert the two hex nuts into the slots so that the round side faces

inward.

23. Insert the lock into the slot above the volume knob so that the

gold dot faces upward.

24. Reassemble the top cover. Make sure the flex circuit ribbon is not

pinched.

25. Turn the unit upside-down and torque the five back cover screws

to 8 in-lb, using a T-15 TORX driver.

26. If the product label was removed while disassembling the unit,

replace it in the recess.

27. Finally, inspect the coaxial cable for proper routing through the

specified openings in the top cover. Ensure that the cable has not
been dislodged from the cable retaining features.

XTVA
Troubleshooting Kit
Procedure

Note: This procedure is continued from step 9 of the disassembly

procedure.

Refer to the exploded view and exploded view parts list on page 54. Items in
parentheses ( ) refer to item numbers in the exploded view.

RF Connector

Universal Header
Assembly

Содержание Astro Dimetra MTP













































































Результаты поиска

Содержание Astro Dimetra MTP

Отзывы:

Похожие инструкции для Astro Dimetra MTP

Бренды по названию

Популярные бренды

Motorola Astro Dimetra MTP, Инструкция по эксплуатации

Результаты поиска

Содержание Astro Dimetra MTP

Отзывы:

Похожие инструкции для Astro Dimetra MTP

Бренды по названию

Популярные бренды