manualshive.com logo in svg

Motorola ASTRO Digital Spectra, Подробное руководство по обслуживанию

Моторола ASTRO Digital Spectra - мощная рация с цифровым шифрованием для надежной коммуникации. Установочное руководство и руководство пользователя можно бесплатно скачать с {веб-сайт} для настройки и использования этого устройства. Надежный помощник в вашей работе или в повседневной жизни.

Поделиться
Скачать
background image

September 5, 2008

6881076C25-E

3-38

Theory of Operation:

 ASTRO Spectra Plus VOCON Board

3.4

ASTRO Spectra Plus VOCON Board

This section of the theory of operation provides a detailed circuit description of an ASTRO Digital 
Spectra Plus Vocoder/Controller (VOCON) board. When reading the Theory of Operation, refer to 
your appropriate schematic and component location diagrams located in 

“Chapter 7. Schematics, 

Component Location Diagrams and Parts Lists”

 of this manual. This detailed Theory of Operation will 

help isolate the problem to a particular component. However, first use the 

ASTRO Digital Spectra 

and Digital Spectra Plus Mobile Radios Basic Service Manual

 to troubleshoot the problem to a 

particular board.

NOTE:

The information in this subsection applies to the 

Plus

 VOCON board. Refer to Section 

3.3, "ASTRO Spectra VOCON Board," on page 3-15

 for information on the ASTRO Spectra 

VOCON (non Plus) board.

3.4.1

General

The ASTRO Spectra Plus VOCON board consists of two subsystems; the vocoder and the 
controller. Although these two subsystems share the same printed circuit board and work closely 
together, it helps to keep their individual functionality separate in describing the operation of the 
radio. The controller section is the central interface between the various subsystems of the radio. It is 
very similar to the digital logic portion of the controllers on many existing Motorola radios. Its main 
task is to interpret user input, provide user feedback, and schedule events in the radio operation, 
which includes programming ICs (Integrated Circuits), steering the activities of the DSP (Digital 
Signal Processor), and sending messages to the display through the control head. The vocoder 
section performs functions previously performed by analog circuitry. This includes all tone signaling, 
trunking signaling, and conventional analog voice, etc. All analog signal processing is done digitally 
utilizing a DSP56600. In addition it provides a digital voice plus data capability utilizing IMBE voice 
compression algorithms. Vocoder is a general term used to refer to these DSP based systems and is 
short for voice encoder. In addition, the ASTRO Spectra Plus VOCON board provides the 
interconnection between the MCU (microcontroller unit), DSP, command board, and UCM (Universal 
Encryption Module) on secure-equipped radios.

3.4.2

ASTRO Spectra Plus Controller Section

Refer to 

Figure 3-14 on page 3-39

 and your specific schematic diagram located in Chapter 7.

The controller section of the ASTRO Spectra Plus VOCON board consists entirely of digital logic 
comprised of a microcontroller unit core (Patriot IC-U300), and memory consisting of: SRAM (U302), 
and FLASH ROM (U301). The Patriot IC is a dual-core processor that contains a DSP56600 core, a 
MCore 210 microcontroller core and custom peripherals. Note: When the Controller Section 
references the MCU, it will be referencing the Mcore 210 inside the Patriot IC (U300).

The MCU (U300) memory system is comprised of a 256k x 16 SRAM (U302) and a 2M x 16 FLASH 
ROM (U301). The MCU also contains 22.5k x 32 of internal SRAM. The FLASH ROM contains the 
programs that the Patriot IC executes, and is used to store customer specific information and radio 
personality features (i.e. codeplug information). The FLASH ROM allows the controller firmware to 
be reprogrammed for future software upgrades or feature enhancements. The SRAM is used for 
scratchpad memory during program execution.

The controller performs the programming of all peripheral ICs. This is done via a serial peripheral 
interface (SPI) bus, and through General Purpose Input/Outputs (GPIO) from the Patriot IC. ICs 
programmed through these interfaces include the Synthesizer, Prescaler, DAIC, and KRSIC (U200) 
and ADDAG (U201).

Содержание ASTRO Digital Spectra



























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ASTRO Digital Spectra

Barrett 900 Series Programming Software Manual preview
900 Series
Бренд: Barrett Страницы: 30
Sangean Sangean RCR-5 Operating Instructions Manual preview
Sangean RCR-5
Бренд: Sangean Страницы: 71
Lanzar VBD 1600MP Owner'S Manual preview
VBD 1600MP
Бренд: Lanzar Страницы: 12
Velleman PMRSET2 User Manual preview
PMRSET2
Бренд: Velleman Страницы: 18
Eton Grundig G5 Owner'S Manual preview
Grundig G5
Бренд: Eton Страницы: 43
Sandstrom S4DABB13E Instruction Manual preview
S4DABB13E
Бренд: Sandstrom Страницы: 92
RJE ATT-400/AODC User Manual preview
ATT-400/AODC
Бренд: RJE Страницы: 13
Sangean U4 DBT+ Manual preview
U4 DBT+
Бренд: Sangean Страницы: 43
SOUNDMASTER SCD2000 Manual preview
SCD2000
Бренд: SOUNDMASTER Страницы: 19
OXYLANE GEONAUTE On channel 700 Manual preview
GEONAUTE On channel 700
Бренд: OXYLANE Страницы: 244
Garmin 190-01098-00 Owner'S Manual preview
190-01098-00
Бренд: Garmin Страницы: 62
Garmin VHF 300 - Marine Radio Instruction Manual preview
VHF 300 - Marine Radio
Бренд: Garmin Страницы: 6
Entel HT644 Series Quick Start User Manual preview
HT644 Series
Бренд: Entel Страницы: 2
Medion E66452 User Manual preview
E66452
Бренд: Medion Страницы: 40
Rockwell RD2304.9 Manual preview
RD2304.9
Бренд: Rockwell Страницы: 12
Oricom UHF058 User Manual preview
UHF058
Бренд: Oricom Страницы: 30
Oricom DTX4200 Operating Instructions Manual preview
DTX4200
Бренд: Oricom Страницы: 34
MyVQ Retro Mini User Manual preview
Retro Mini
Бренд: MyVQ Страницы: 27

Бренды по названию

Популярные бренды

Загрузить еще бренды