manualshive.com logo in svg

Motorola ASTRO APX 1000 Series, Руководство пользователя, Страница: 73 / 94

Поделиться
Скачать
Motorola ASTRO APX 1000 Series Скачать руководство пользователя страница 73

Helpful Tips

Radio Care

Caution:

• Your radio casting has a vent port that

allows for pressure equalization in the
radio. Never poke this vent   with any
objects, such as needles, tweezers, or
screwdrivers.

A

• Do not submerge the radio as this results

in damage to the radio.

• If water is observed on the battery contact

area, dry and clean the radio battery

contacts before attaching a battery to the
radio. Otherwise, the water could short-
circuit the radio.

• If water is observed on the speaker grill

area, shake the radio well so that any
water that may be trapped inside the
speaker grille and microphone port can be
removed. Otherwise, the water will
decrease the audio quality of the radio.

• Do 

not

 disassemble the radio. This could

damage radio seals and result in leak
paths into the radio. Any radio
maintenance should be performed only by
a qualified radio technician.

Cleaning Your Radio

Caution:

Do 

not

 use solvents to clean your radio as

most chemicals may permanently damage the
radio housing and textures.

Do 

not

 submerge the radio in the detergent

solution.

To clean the external surfaces of your radio, follow
the procedure described next.

Helpful Tips

69

English

Содержание ASTRO APX 1000 Series































































































Отзывы:

Нет отзывов