Motorola ASTRO APX 1000 Series Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 94

Motorola ASTRO APX 1000 Series Скачать руководство пользователя страница 60

Peer-Location on the Display (ASTRO Conventional
only)

This feature is only available for radio-to-radio voice
transmissions, dispatch call and selective call in
conventional ASTRO system. For radio-to-radio
transmission, in order to allow the radio to show peer-
location, the voice should be directly sent from one
radio to another radio without passing through any
infrastructure facility such as repeaters, phone or
DVRS system. Both the transmitting radio and
receiving radio must be configured to enable them to
send and/or receive the GPS coordinates. You can
check with your nearest qualified technician for more
details.

Note:

If the receiving radio is operating in a Mixed
Mode channel, only if its voice transmission is
via conventional ASTRO system then it can
receive the location coordinates of its peers.

This feature is also operable in a Scan Active channel
or Scan Talkback channel.

Upon receiving a voice transmission with GPS
coordinates enabled on the receiving radio, the
display shows the coordinates available in full or in
short coordinates. There are two different formats

available. Refer to the following list for the details
shown in the Peer-Location quick text. Consult your
agent to pick the best format to configure to your
radio.

Full location
coordinates

• PTT ID (This is optional.)
• Longitude and latitude
• Relative distance or

direction.

Short location
coordinates

• PTT ID (This is optional.)
• Longitude and latitude

Geofence (ASTRO 25 Trunking System)

Geofence is a virtual perimeter based on the GPS to
define a geographical area on earth.

When the radio enters the predefined Geofence area,
your radio receives the Dynamic Regroup command
from the system and immediately connects to a
Dynamic Regroup talkgroup. The radio display shows
the new selected Dynamic Regrouped talkgroup with
green intelligent light for your attention.

Voice Announcement is also available to support this
feature. Check with your nearest qualified technician

Advanced Features

56

English

«
...
58
59
60
61
62
...
»

Содержание ASTRO APX 1000 Series































































































Отзывы:

Нет отзывов