manualshive.com logo in svg

Motorola APX N50, Руководство пользователя, Страница: 29 / 106

Поделиться
Скачать
Motorola APX N50 Скачать руководство пользователя страница 29

Function

Description

Channel Announcement

Allows you to hear the Voice Announcement audio file that is
assigned to the radio's current channel/mode.

Channel Up/Down

Allows you to scroll up or down to other channels within the
current Zone.

Contacts

Allows you to access the 

Contacts

 menu.

Dual Tone Multiple Frequency
(DTMF) Tone

Allows you to send out DTMF code of the assigned DTMF
value. For example, when DTMF Tone 9 is selected, you can
send out DTMF Tone 9.

Dynamic ID (Conventional Only)

Allows you to edit the ASTRO Individual ID and/or MDC
Primary ID of the radio.

NOTE:

If the Dynamic ID menu key is not programmed
in the radio, use dongle to display the menu key.
Press the menu key and enter the password to
view or edit the ASTRO Individual ID and/or MDC
Primary ID of the radio.

If the password is not programmed, press the
menu key to directly view or edit the ASTRO Indi-
vidual ID and/or MDC Primary ID of the radio.

Dynamic Priority (Conventional
Only)

Allows any channel in a Scan List (except for a Priority-One
channel) to temporarily replace the Priority-Two channel.

Emergency

Allows you to send or cancel Emergency Alarm to the dis-
patcher.

Info

Allows you to display the Radio Information, Internet Proto-
col (IP) Display, SIM Status, Control Assignments and Soft
ID (if enabled).

Internet Protocol (IP)

Allows you to display the IP address.

Keypad/Control Lock

Toggles the keypad/control to lock or unlock.

Light/Flip

To turn on the display backlight on and off, press the button.

Location

Displays the current location (latitude, longitude, time, and
date), and also the distance and bearing to another location,
or toggles GPS/Location between on and off.

Man Down Clear

Allows you to clear and deactivate the Man Down (Fall Alert)
Emergency mode alarm.

Message

Allows you to access the message list.

Monitor (Conventional Only)

Monitors a selected channel for all radio traffic until the func-
tion is disabled.

MS01–MS13

Allows you to program these buttons with frequently used or
any desired zone and channel combination.

Multiple Private Line (Conventional
Only)

Allows you to access the Multiple Private Line lists.

Nuisance Delete

Temporarily removes an unwanted channel from scan list,
except for priority channels and the designated transmit
channel.

MN009203A01-AA

Chapter 2 :  Radio Overview

  23

Содержание APX N50











































































































Отзывы:

Нет отзывов