Motorola APX Mobile Скачать руководство пользователя страница 80

Страница: 80 / 146

Advanced Features

English

Special Considerations for Emergencies

• If you press the emergency button while in a channel that has

no emergency capability, a low-pitched tone sounds.

• If the unit is out of the range of the system and/or the

emergency alarm is not acknowledged, a tone sounds and

the display shows

No acknowledge

• If you press the emergency button, then change to a mode

that has no emergency capability, the display shows

No Emergency

and a continuous low-pitched tone sounds

until a valid emergency mode is selected or until the

emergency is cancelled.

• When an emergency is active, changing to another mode

where emergency is enabled (trunked or conventional)

causes an emergency alarm and/or emergency call to be

active on the new mode.



Содержание APX Mobile



















































































































































Результаты поиска

Содержание APX Mobile

Отзывы:

Motorola APX Mobile, Руководство пользователя, Страница: 80 / 146

Результаты поиска

Содержание APX Mobile

Отзывы: