manualshive.com logo in svg

Motorola APX Mobile, Руководство пользователя, Страница: 113 / 146

Поделиться
Скачать
Motorola APX Mobile Скачать руководство пользователя страница 113

Advanced Features

English

95

Auto Power Off Timer

Auto Power Off feature powers off the radio when no user 
actions occur during a preprogrammed length of time. There are 
two different versions of Auto Power Off:

Inactivity Auto Power Off Timer

 

–

 This timer begins once the 

radio is power-on. While the timer is active any user interaction 
with the radio resets the timer.

Ignition Auto Power Off Timer

 

–

 This timer begins once the 

vehicle key is removed, when the voltage at the ignition sense is 
removed. While the timer is active any user interaction with the 
radio resets the timer. When the vehicle key is reapplied, the 
voltage at the ignition is reconnected, this timer is stopped.

Although both Inactivity Auto Power Off and Ignition Auto Power 
Off can be enabled together, Ignition Auto Power Off timer is 
mutually exclusive with Inactivity Auto Power Off timer when 
both are enabled.

During the last two minutes of the timer countdown, the radio 
generates continuous low tone and blinks 

Powering off

 

warning on the display until the timer expires or the timer is 
reset. The radio automatically powers off after the timer expires. 
The duration of the timer is preprogrammed.

Voice Announcement

This feature enables the radio to audibly indicate the current 
feature mode, zone or channel the user has just assigned. This 
audio indicator can be customized per customer requirements. 
This is typically useful when the user is in a difficult condition to 
read the content shown on the display. 

Each voice announcement is within a limit of three seconds 
maximum. The sum duration of all different voice 
announcements in a radio shall be no more than 1000 seconds.

Note:

This feature must be preprogrammed by a qualified 
radio technician.

Check with your agent if Voice Announcement is 
available for the feature you need.

The two options of priority for the Voice Announcement 
available are:

•

High

 

–

 enables the voice of the feature to announce even 

when the radio is receiving calls.

•

Low

 

–

 disables the voice of the feature from announcing 

when the radio is receiving calls.

Содержание APX Mobile



















































































































































Отзывы:

Нет отзывов