Motorola APX MOBILE O3 CONTROL HEAD, Руководство пользователя

Страница: 125 / 160

If radio is out of range, roaming to a foreign
system or in a failsoft situation, the display shows
Req failed
.
If the request is successful, the display shows
Req
successful
.
5 To return to the Home screen, press the Menu
Select button directly below
Exit
.
The SSA Alert for all available sites stop.
Channel Change on Off Hook on All Channels
This feature enables the mode of the radio to be
changed based on the HUB on/off-hook state on all
control heads.
Whenever the radio goes off-hook, the radio changes
to a preprogrammed zone channel specifically for off-
hook state. When the user returns the radio to on-
hook state, it reverts to its previous channel zone
before the radio goes off-hook.
When the radio is in off-hook state, manual mode
change (including mode change triggered by third
party devices) is allowed. Radio reverts back to the
last mode before off-hook once the radio goes on-
hook.
Note:
During PL Defeats and Suspend Scan during
on-hook state, the radio is converted to work
in new channel and Channel Change on Off
Hook feature is suspended until these
conditions end.
We do not recommend that “Hub Suspend
Scan" and "Channel Change on Off Hook" to
be enabled simultaneously.
During Dynamic Regroup channel selector
lock state, Emergency, Transmit Inhibit, radio
lock, or when external key loaded is attached
to the radio, the Channel Change on Off Hook
feature is suspended until these conditions
end.
The Off
Hook
State for
APX
™
Dual
Radio
Setup
For Dual Radio, the state of the HUB
on the unselected radio is always
considered as on-hook. The state of
the HUB of the selected radio is always
reflected as the actual states of the
HUB. When the HUB is placed off-
hook, the selected radio makes
channel change per CPS configuration,
and the unselected radio does not
trigger channel change.
Advanced Features
121
English