Motorola APX 8000 Скачать руководство пользователя страница 13

Страница: 13 / 112

Software Version

All the features described in the following sections are
supported by the radio's software version

R14.00.00

or later.

See

Accessing the Radio Information

to determine

your radio software version.

Check with your dealer or system administrator for
more details of all the features supported.

Notice to Users (FCC and Industry Canada)

This device complies with Part 15 of the FCC rules
and RSS 210 of the Industry Canada rules per the
following conditions:

• This device may not cause harmful interference.
• This device must accept any interference

received, including interference that may cause
undesired operation.

• Changes or modifications made to this device, not

expressly approved by Motorola, could void the
authority of the user to operate this equipment.

Software Version

English

Содержание APX 8000

















































































































Результаты поиска

Содержание APX 8000

Отзывы:

Похожие инструкции для APX 8000

Бренды по названию

Популярные бренды

Motorola APX 8000, Руководство пользователя

Результаты поиска

Содержание APX 8000

Отзывы:

Похожие инструкции для APX 8000

Бренды по названию

Популярные бренды